The second video stream for Cisco 3000 and 6000 series units must be enabled on the unit’s web page.
When the second stream is enabled on Cisco CIVS-IPC-6050 and CIVS-IPC-6400E units, the maximum frame rate of both streams is limited to 15 FPS.
What you should know
- Click and log on.
- Click .
- Under Current Stream, select Stream 2 and check the Enable Stream option.
Under Video, select MJPEG as the
NOTE: Because MJPEG is used for the second stream, selecting H.264 has no effect,
- Click Save.
Add the unit to Security
If your unit is already part of the Security Center system, restart the unit for your changes to take effect.