Configuring date and time on the NVR - Security Center 5.7 SR5

Security Center Video Unit Configuration Guide 5.7 SR5

Applies to
Security Center 5.7 SR5
Last updated
2019-02-15
Content type
Guides
Guides > User guides
Language
English
Product
Security Center
Version
5.7

You must configure the date and time on the Network Video Recorder (NVR).

Procedure

  1. Make sure you are connected to a device by following: Connecting to a device.
  2. Click System.
  3. Click Date & Time.
  4. Select the Time zone. For example, GMT-00:00 Greenwich Mean Time, without DST)
  5. Configure Daylight Saving Time if necessary.
  6. Set the current date and time.
  7. Click OK.