You must configure the Bosch Intuikey CCTV keyboard before using it in Security
Desk.
Before you begin
Make sure that the RS-232 port of the Bosch Intuikey CCTV keyboard is connected to the
COM port of the computer.
What you should know
The top four buttons on Bosch Intuikey CCTV keyboards can control the Play, Pause,
Next, and Previous commands of a camera sequence in the
Security
Desk. The default button association is
the following:
| Button on Bosch keyboard |
Command in Security
Desk
|
| Pause |
Pause |
| Play |
Play/Resume |
| FF |
Show previous camera in the sequence |
| REW |
Show previous camera in the sequence |
Procedure
-
From the home page in Security
Desk,
click .
-
From the Keyboard protocol drop-down
list, select Bosch Intuikey.
-
From the Communication port drop-down list, select the COM
port you just connected the keyboard to.
-
From the Data bits drop-down list, select
8.
-
From the Parity drop-down list, select
None.
-
From the Stop bits drop-down list, select
One.
-
From the Baud rate drop-down list, select
19200.
-
Click .
Results
The keyboard is ready to use.
