Before viewing video with a Hanwha Techwin 360° fisheye camera lens in Security Desk, you must configure the SNF-8010 lens in Config Tool.
Dewarping allows you to zoom in on a 360° image, similar to the digital zoom feature in Security Desk. The zoomed image is dewarped, or flattened to show a rectangular image.
What you should know
IMPORTANT: Hanwha Techwin fisheye cameras that have been previously added to your Security Center system prior to 5.5 SR4 will continue to use the Hanwha Techwin lens. If you want to use the Panomorph lens as described in this task, remove the fisheye camera from your Security Center system and add it back again.
- From the Video task in Config Tool, select the camera to configure.
- Click the Hardware tab.
- From the Lens type drop-down list, select Panamorph.
- Click Edit ().
In the Configure lens dialog box, do the following:
- Select the Camera position.
Select the Panomorph Lens Type (RPL).
The lens is supplied from the manufacturer with the unit.
- Under Manual calibration, click Calibrate.
- Click .