Input pins on Mango DSP units work with a logical circuit value of 0/1.
Security Center closing and opening events are mapped
as follows:
- To trigger an input pin closing event, the voltage on the pins should be dropped from 5
volts to 0 volts.
On Pegasus M units, the default value is 1. To change it to 0, short the pins.
- To trigger an input pin opening event, the voltage on the pins should be raised from 0
volts to 5 volts.
On Condor VS-8 and VS-16 units, the default value is 0. To change it to 1, apply 5 volts on the pins.
NOTE: The voltage mentioned is approximate, for the exact voltage range; please see the
documentation for your Mango DSP unit.