Modifying video quality settings for the Traficon VIP-IP unit - Security Center

Security Center Video Unit Configuration Guide

Applies to
Security Center
Last updated
Content type
Guides > User guides
Security Center

If you want to modify video settings for a camera attached to a VIP-IP unit, you must first remove it from Security Center and the VIP-IP Traficon Configuration Tool.


  1. From the Video task in Config Tool, remove the VIP-IP unit from Security Center.
  2. In the Traficon Configuration Tool, beside IP Address remove the RTSP video stream IP address.
  3. Open the web page of the camera and modify the desired video settings.
    IMPORTANT: Make sure the frame rate and bit rate is not beyond the capabilities of the VIP-IP unit.
  4. Open the Traficon Configuration Tool and beside IP Address, add the IP address of the RTSP video stream back to the VIP-IP.
  5. Add the VIP-IP unit back to your Security Center system.