Adding a Z3Stream encoder unit - Security Center 5.9.0.0

Security Center Video Unit Configuration Guide 5.9.0.0

series
Security Center 5.9.0.0
revised_modified
2020-02-07
category_custom
Guides
Guides > User guides
prodname_custom
Security Center unified platform > Security Center
vrm_version
5.9

You can add a Z3Stream encoder unit as an RTP Unicast Listener to Security Center.

Procedure

  1. From the Config Tool home page, open the Video task.
  2. Click () Add.
    The Manual add dialog box opens.
  3. In the Manufacturer drop-down list, select Generic Stream.
  4. In the Product type drop-down list, select RTP Unicast Udp.
  5. Enter the archiver IP address.
  6. Enter the destination port of the UDP Z3 Stream.
  7. Select the correct Video codec.
  8. Click Add.
  9. Open the unit's web page.
  10. In the Encoder screen, select RTP/RTSP as the Output Format and click Start.
    When rebooting, the unit will default back to UDP. You must switch it back to RTP/RTSP.