Configuring Intelbras fisheye camera lenses - Security Center 5.9.0.0

Security Center Video Unit Configuration Guide 5.9.0.0

series
Security Center 5.9.0.0
revised_modified
2020-02-07
category_custom
Guides
Guides > User guides
prodname_custom
Security Center unified platform > Security Center
vrm_version
5.9

To view and dewarp video images in Security Desk that were captured using an Intelbras fisheye camera lens, you must configure the lens in Config Tool.

What you should know

Dewarping allows you to zoom in on a 360 degree image, similar to the digital zoom feature in Security Desk. The zoomed image is dewarped, or flattened to show a rectangular image.

Procedure

  1. From the Video task in Config Tool, select the camera to configure.
  2. Click the Hardware tab.
  3. From the Lens type drop-down list, make sure Intelbras is selected.
  4. Click Edit ().
  5. In the Configure lens dialog box, do the following:
    1. Select the Camera position.
    2. To set the center position of the fisheye, drag the left mouse button.
    3. To adjust the radius of the fisheye, drag the right mouse button.
      NOTE: The blue region represents the area that can be dewarped in a Security Desk tile.
  6. Click OK > Apply.

After you finish

For your changes to take effect, remove the camera from all Security Desk tiles, and then re-add the camera.