Configuring Panasonic Smart Coding - Security Center 5.9.0.0

Security Center Video Unit Configuration Guide 5.9.0.0

series
Security Center 5.9.0.0
revised_modified
2020-02-07
category_custom
Guides
Guides > User guides
prodname_custom
Security Center unified platform > Security Center
vrm_version
5.9

To use Panasonic Smart Coding, you must configure the Image capture mode on the unit's web page, and select VBR (variable bit rate) as the Bit rate priority in Config Tool.

What you should know

Smart Coding can only be used for H.264 streams.

Procedure

  1. Open the unit’s web page.
  2. Click Setup > Image/Audio.
  3. Select an Image capture mode and click Set.
  4. Add the unit to Security Center.
  5. From the entity tree, select the camera and then click the Video tab.
  6. In the Bit rate priority field, select VBR.
    The Smart Codec option appears.
  7. Beside Smart Codec, select On.
  8. Click Apply.