Configuring resolution for Hanwha Techwin SNP-3750 units - Security Center 5.9.0.0

Security Center Video Unit Configuration Guide 5.9.0.0

Applies to
Security Center 5.9.0.0
Last updated
2020-02-07
Content type
Guides
Guides > User guides
Language
English (United States)
Product line
Security Center unified platform > Security Center
Version
5.9

The video stream resolution for Hanwha Techwin SNP-3750 units using either MPEG-4 or MJPEG streaming must be configured using the unit's web page.

Procedure

To configure the resolution for a Hanwha Techwin SNP-3750 unit in MPEG-4:

  1. Open the unit's web page.
  2. Click Video Setup > Streaming.
  3. From the Unicast Image Resolution drop-down list, select the desired resolution.

To configure the resolution for a Hanwha Techwin SNP-3750 unit in MJPEG:

  1. Open the unit's web page.
  2. Click Video Setup > Streaming.
  3. From the Unicast Image Resolution drop-down list, select the desired resolution.
  4. Modify the video resolution on the machine that is running Config Tool, as follows:
    1. Navigate to the SNP-3750 cam file, located in: C:\Program Files\Genetec Security Center 5.7\Extensions\Cam Files\Samsung SNP3750.cam on 32- bit machines, and C:\Program Files (x86)\Genetec Security Center 5.7\Extensions\Cam Files\Samsung SNP3750.cam on 64-bit machines.
    2. Open the SNP3750.cam file in Notepad.
    3. Locate the following line: <MjpegURLs>public/video.cgi?ch=1&resolution=cif</MjpegURLs>
    4. Replace cif with the desired resolution: qcif, cif, or 4cif.
      IMPORTANT: Use lowercase text only.
  5. If the unit is already added in Security Center, delete the unit, and add it using the Config Tool station where the .cam file has been modified.