Enabling 60 fps for Sony 6th generation units - Security Center 5.9.0.0

Security Center Video Unit Configuration Guide 5.9.0.0

series
Security Center 5.9.0.0
revised_modified
2020-02-07
category_custom
Guides
Guides > User guides
prodname_custom
Security Center unified platform > Security Center
vrm_version
5.9

For Sony 6th generation units to stream at 60 frames per second in Security Center, additional configuration steps are required in Config Tool.

Procedure

  1. From the Video task in Config Tool, select the camera to configure.
  2. Click the Hardware tab.
  3. From the Mode drop-down list, select High fps.
  4. Click Apply.

Results

When you set the Mode to High frame rate, the Wide dynamic range level on the unit is decreased, because streaming at a high framerate such as 60 fps requires a low Wide dynamic range level. The Wide dynamic range level is set on the unit’s web page under Settings > System > Installation.