Enabling edge recording for Bosch units - Security Center 5.9.0.0

Security Center Video Unit Configuration Guide 5.9.0.0

series
Security Center 5.9.0.0
revised_modified
2020-02-07
category_custom
Guides
Guides > User guides
prodname_custom
Security Center unified platform > Security Center
vrm_version
5.9

Before you can transfer video from Bosch video units to an Archiver using archive transfer in Security Center, you must first enable edge recording on the video units.

What you should know

Bosch video units support edge recording on an iSCSI drive managed by Bosch VRM (Video Recording Manager). The VRM settings must be configured in the Archiver’s extension for the manufacturer that supports it.

Procedure

  1. Open the Video task in Config Tool, and select the Archiver that is managing the Bosch cameras.
  2. Click the Extensions tab, and select the installed Bosch extension.
  3. Under the VRM section, click Add an item ().
  4. In the dialog box that appears, enter the IP address of the VRM and the logon credentials, and then click Save.
  5. From the Playback mode drop-down list, select one of the following options:
    • iSCSI
    • TCP redirection via VRM
    • UDP redirection via VRM
  6. Select the data transport method according to the configuration of your Bosch VRM.
  7. Click Apply.