Setting capture modes for Axis units - Security Center 5.9.0.0

Security Center Video Unit Configuration Guide 5.9.0.0

series
Security Center 5.9.0.0
revised_modified
2020-02-07
category_custom
Guides
Guides > User guides
prodname_custom
Security Center unified platform > Security Center
vrm_version
5.9

For Axis cameras that support multiple capture modes, you must configure the capture mode on the unit’s web page before adding the unit to Security Center.

What you should know

The UI can vary depending on the firmware version. The capture mode setting can be found under the Camera settings or Image tab.

Procedure

  1. Open the unit's web page.
  2. Click Settings > Image tab.
  3. Set the resolution from the Capture mode setting.
  4. Click Save.