Configuring video resolution for Bosch H.264 units - Security Center 5.9.2.0

Security Center Video Unit Configuration Guide 5.9.2.0

Applies to
Security Center 5.9.2.0
Last updated
2021-04-09
Content type
Guides > User guides
Language
English
Product
Security Center
Version
5.9

To configure the video resolution for Bosch H.264 units with firmware 4.50 and later, you must first select a base operation mode.

What you should know

If the unit has two H.264 video streams, the settings for stream2 are limited to the settings specified for stream1.

Procedure

  1. From the Video task in Config Tool, select the camera to configure.
  2. Click the Hardware tab.
  3. From the Video Mode drop-down list, select a base operation mode.
    Depending on the base operation mode you choose, the available resolutions and video quality settings for the two H.264 streams change. For example, to enable a video frame rate of 60 frames per second, select 1:720p 60fps, 2:Copy.
  4. Click Apply.
  5. Click the Video tab.
  6. From the Resolution drop-down list, select the desired resolution.
  7. Click Apply.