Configuring video settings with Smartviewer AUTO - Security Center 5.9.2.0

Security Center Video Unit Configuration Guide 5.9.2.0

Applies to
Security Center 5.9.2.0
Last updated
2021-04-09
Content type
Guides > User guides
Language
English
Product
Security Center
Version
5.9

You can edit video profiles using Smartviewer AUTO.

Before you begin

Make sure you have added a camera to the device by following: Add a camera to the SRM-872.

Procedure

  1. Click Network > Transmission > Network Profile tab.
  2. Click Edit to see all the profiles present on the device.
    1. To delete an existing profile, click .
      NOTE: You cannot delete the default profiles (MJPEG, H.264 and MPEG4).
    2. To create an new profile, click .
      NOTE: Enter the name you want to give the profile and select the video codec to use.
  3. To change the current resolution of a profile, click Resolution and select a new value from the drop-down list.
  4. To change the current FPS of a profile, click FPS and select a new value from the drop-down list.
  5. To change the current bitrate of a profile, click on the Kbps numeric control. You can either type a new value using the keyboard, or use the up and down arrows to select the desired value.
  6. Select the video profile you want to use for streaming purposes.