Setting capture modes for Axis units - Security Center 5.9.2.0

Security Center Video Unit Configuration Guide 5.9.2.0

Applies to
Security Center 5.9.2.0
Last updated
2021-04-09
Content type
Guides > User guides
Language
English (United States)
Product
Security Center
Version
5.9

For Axis cameras that support multiple capture modes, you must configure the capture mode on the unit’s web page before adding the unit to Security Center.

What you should know

The UI can vary depending on the firmware version. The capture mode setting can be found under the Camera settings or Image tab.

Procedure

  1. Open the unit's web page.
  2. Click Settings > Image tab.
  3. Set the resolution from the Capture mode setting.
  4. Click Save.