Configuring MPEG-4 streaming for MediaRacer 152 units - Security Center 5.9.4.0

Security Center Video Unit Configuration Guide 5.9.4.0

Applies to
Security Center 5.9.4.0
Last updated
2022-02-18
Content type
Guides
Guides > User guides
Language
English
Product
Security Center
Version
5.9

For Mavix MediaRacer 152 units to stream MPEG-4 video properly in Security Center, you must ensure that the unit firmware version matches the MPEG-4 version.

Procedure

  1. Open the Mavix Configurator and enter Administrator as the default username and Admin as the password.
  2. Click the Update Firmware icon, and click the Manual Update tab.
  3. Type the current IP address, username, and password of the unit.
  4. Under MediaRacer, select IXX.
  5. In the Unit firmware version section, click Read.
  6. Make sure that the Firmware version is at least 7.1.1.0, followed by the letter "r" (for example, 7.1.1.0r).
  7. Make sure that the Codec is Mpeg4, and that the version matches the firmware version listed above it.