You must connect the SiPass plugin role to the SiPass server. You can also specify which users receive alarm notifications.
Create the plugin role.
Before you begin
Only specific configuration settings are described here. Only specific configuration settings are described here. For more information about generic Config Tool settings, such as the Identity settings, see Common configuration tabs.
What you should know
- From the home page in Config Tool, open the Plugins task.
- In the entity browser pane, select the SiPass plugin, and then click the Properties tab.
- In the Host field, enter the hostname or IP address of the SiPass server.
In the Port field, enter the port number of the SiPass server.
The default port number is 5645. It must be unblocked on your network.IMPORTANT: If you change the port number here, you must also change it on the SiPass server.
In Alarm recipients, select
the users or user groups who will be notified when alarms are triggered by the
NOTE: The users or user groups selected here are the default alarm recipients configured when alarm entities are created by the plugin. If this list is empty, alarms will still be triggered in Security Center, but no user will be notified. You can also add alarm recipients later in the alarm entity Properties tab.
In Alarm partitions, select
the partitions to which the alarm entities will be added when created by the
Alarms created by the plugin will always be members of the those partitions. Partitions added through the Alarms task will be removed by the plugin if you modify Alarm partitions again.
- Click Apply.
The SiPass entities are synchronized in Security Center and are added under the SiPass plugin in the entity browser. Alarm entities and custom events are also created to map those reported by SiPass.
NOTE: The time required for synchronization varies depending on how many entities must be synchronized.
This shows the basic configuration in the Properties tab that allows the plugin role to connect to the SiPass server and have alarms sent to specific users.
After you finish
- Open the Synchronization tab, and confirm that your SiPass entities appear as expected.
- Assign Security Center cameras to SiPass doors.
- Configure output behaviors to trigger outputs in SiPass.