Configuring Call Settings for the Aiphone IX-DVM SIP intercom - Sipelia 2.11 - 2.13

To configure the call settings for the Aiphone IX-DVM device, do the following:

1. Navigate to the Call Settings section, and in Station Information, set Call Button Function to Call, Answer Call, End Communication.

2. In Called Stations, set the destination that you want to call when the button is pressed:

   1. In Station number, enter the extension you want to call.

   2. In IPv4 Address, enter the IP address of the Sipelia server.

   3. Set the Station Type to VoIP Phone

3. In Incoming Call, specify if you want the intercom to answer incoming calls automatically.

   

   Note: Firmware 5.75 has an issue where the auto-answer does not work.

4. In Contactless Call, specify if you want to enable the contactless feature of the unit.

   

   Note: It is recommended that you disable this feature.

5. Click Update.