Configuring SIP settings for the Commend SIP Series intercom - Sipelia 2.11 - 2.13

Sipelia™ Commend SIP Series VoIP Device Integration Guide

Applies to
Sipelia 2.11 - 2.13
Last updated
2024-02-15
Content type
Guides > Integration guides
Language
English
Product
Sipelia
Version
2.13
2.12
2.11

To configure SIP settings for the Commend SIP Series intercom, do the following:

  1. In the SIP section, click the General tab.

  2. In the Display name field, enter Sipelia.

  3. Set Registration to Enabled.

  4. In the User ID and Authentication ID fields, enter the extension that was assigned when you added the SIP intercom in Security Center.

  5. In the Password field, enter the password that was set when you added the SIP intercom in Security Center.

  6. In the SIP Server field, enter the IP address of the Sipelia Server.

  7. From the drop-down list under Transport protocol, select UDP.

  8. From the drop-down list under RTP mode, select RTP.

  1. (Optional) In the SIP section, under the Call settings tab, set Answer Call to Auto answer if you want the intercom to answer automatically when receiving a call.