To use your SAFR SCAN biometrics access device with Sipelia™, you must add the device as an SIP intercom in Security Center.
From the Config Tool homepage, select the Sipelia plugin role.
At the bottom of the page, click Add intercom.
Enter a name and click Add.
The configuration page of the intercom opens.
Click the VoIP tab and assign an SIP extension and a password to your SIP intercom to authenticate the intercom.
To communicate with other SIP endpoints, every SIP intercom in Security Center must have a unique SIP extension assigned to it. The recommended approach is to automatically assign the extension. Or, you can assign the extension manually.
Click Auto-assign and select an existing range of phone extensions.
The SIP intercom is automatically assigned to the next available phone extension in the range and the correct password for the range is populated.Assign the extension manually:
SIP extension: The phone extension of the SIP intercom.
Password: The password for the extension. This password was specified when creating the extension range. Each SIP extension within a given range has its password automatically set to match the default password for that range.
(Optional) Click Auto-assign to select the next available extension in the range that you selected.
NOTE: You need this information later when configuring the intercom.
To save the configuration, click Apply (
).
The Sipelia server is now ready to accept the registration from the SAFR SCAN device.