To make calls from your SIP intercom to Security Center users, you must register the intercom
with Sipelia™ Server.
What you should know
There are many SIP intercoms that you can install, and the way
they are configured and registered to
Sipelia™
Server might differ. The steps below provide a general overview of the settings that
must be configured. Always refer to the documentation provided by the manufacturer of
the SIP intercom for information on how to configure and register the intercom.
Procedure
To register your SIP intercom with Sipelia™ Server:
-
Create a SIP account on your intercom.
-
Enter an applicable name for your SIP account.
This name can be the same as the one given to the intercom when adding it to
Security Center, but it does not
need to be. The SIP account name is not used during SIP communications.
-
Enter the domain or IP address of Sipelia™ Server.
You can find the IP address of Sipelia™ Server in .
-
For the SIP port value, enter the value that you configured. The default value
used by the Session Initiation Protocol (SIP) is
5060.
-
Enter the SIP extension that was assigned to this intercom in Security Center. In some SIP clients, you
must enter the extension number as the username.
-
Enter the password for the SIP extension that has been assigned to the
intercom.
-
Register the intercom so that it can communicate with Sipelia™ Server.
To authenticate incoming calls from your SIP intercom:
Results
The SIP intercom is ready to make and receive calls.