Use the Network page of the Streamvault appliance portal to modify the network and connectivity settings of your appliance.
The following information is displayed:
Adapters
The drop-down shows the available embedded network interface cards (NICs) that you can configure as needed.
- Automatic (DHCP)
- By default, Dynamic Host Configuration Protocol (DHCP) is used to automatically assign the IP address, Subnet, Gateway, and DNS server. Clear this option if you don't want your DHCP server to assign the IP address dynamically.
- IP address
- The IP address of the machine.
- Subnet
- The subnet mask of the machine.
- Gateway
- The IP address of the gateway.
- DNS server
- The IP address of the DNS server.
Connectivity
- Local machine only
- This feature prevents remote access to the Streamvault appliance portal. Enable the feature if you want users to access the portal only from the appliance.