Enrolling Synergis™ units in Security Center - Synergis™ Softwire 10.10

Synergis™ Appliance Configuration Guide 10.10

Applies to
Synergis™ Softwire 10.10
Last updated
Content type
Guides > Administrator guides
English (United States)
Product line
Synergis > Synergis™ Softwire

To enroll a Synergis™ unit in Security Center, assign the unit to an Access Manager.

What you should know

Creating the Access Manager adds the extensions by default. However, the required Synergis™ extension is created with the default discovery port: 2000. If you configured your unit with a different port number, you must also change it in config tool.
NOTE: If you select the Activate peer to peer option in Config Tool, be aware that only up to 15 units can be connected as peers.
Best Practice: If you have multiple Access Manager roles controlling Synergis™ units on the same subnet, ensure that they use different discovery ports. Otherwise, you might experience performance issues.


  1. Open the Access control task, and click the Roles and units view.
  2. Select the Access Manager, and click the Extensions tab.
  3. Select the Synergis™ extension.
  4. Select the discovery port and click Edit ().
  5. In the Discovery port dialog box, enter the port number configured for your Synergis™ units and click Save.
    The port number must match the discovery port configured on your Synergis™ units.