To enroll a Synergis™ unit in Security Center, assign the unit to an Access Manager.
Configure the Synergis™ unit's network properties.
Before you begin
Creating the Access Manager adds the extensions by default. However, the required Synergis™ extension is created with the default discovery port: 2000. If you configured your unit with a different port number, you must also change it in config tool.
What you should know
NOTE: If you select the Activate peer to peer option in Config Tool, be aware that only up to 15 units can be connected as peers.
Best Practice: If you have multiple Access Manager roles controlling Synergis™ units on the same subnet, ensure that they use different discovery ports. Otherwise, you might experience performance issues.
- Open the Access control task, and click the Roles and units view.
- Select the Access Manager, and click the Extensions tab.
- Select the Synergis™ extension.
- Select the discovery port and click Edit ().
In the Discovery port dialog box, enter the port number
configured for your Synergis™ units and click
The port number must match the discovery port configured on your Synergis™ units.