Adding Synergis™ units to an Access Manager role - Synergis™ Softwire 11.0

Synergis™ Appliance Configuration Guide 11.0

Applies to
Synergis™ Softwire 11.0
Last updated
2021-08-24
Content type
Guides > Administrator guides
Language
English (United States)
Product line
Synergis > Synergis™ Softwire
Version
11.0

To control the access to secured areas at your site and monitor the access control-related events in Security Center, you must add access control units to an Access Manager role.

Procedure

  1. From the Config Tool home page, open the Access control task, and click the Roles and units view.
  2. Click Access control unit ().
  3. In the Creating a unit dialog box, click Unit type and select Synergis.
    If the unit type is greyed-out, it means the extension is not yet added to the Access Manager.
  4. In the Network endpoint section, enter the hostname or IP address of the unit, the logon username, and the password.
    The default username is admin. You must change the default password to enroll the unit.
  5. If you require port forwarding, click Advanced settings and enter the base URL in the Web address field.
  6. Click Next.
  7. Select a Partition on which to add the access control unit, and click Next.
    Partitions determine which Security Center users have access to this entity. Only accepted users of the partition can view or modify the access control unit.
  8. Review the Creation summary window, and click Create.
    The Access Manager attempts to connect to the unit and enrolls it in your system. When the process is successfully completed, a confirmation message is displayed.
  9. Click Close, and then click Refresh ().
    The newly added Synergis™ unit appears under the Access Manager it was assigned to in the Roles and units view. The default entity name is the hostname of the unit. From now on, this unit only responds to the commands issued by this Access Manager.
    NOTE: If you later change the connection parameters on the Synergis™ unit, you must inform the Access Manager about it by synchronizing the Synergis™ unit with the Access Manager.

After you finish

Associate the peripherals (readers, inputs, outputs, and so on) controlled by this unit to doors and zones defined in your system. For more information about deploying Synergis™, see Deploying your access control system.