Configuring MIFARE DESFire in Synergis™ Softwire 11.0 - Synergis™ Softwire 11.0

Synergis™ Appliance Configuration Guide 11.0

Applies to
Synergis™ Softwire 11.0
Last updated
2021-08-24
Content type
Guides > Administrator guides
Language
English (United States)
Product line
Synergis > Synergis™ Softwire
Version
11.0

To enable MIFARE DESFire on your Synergis™ Cloud Link, you must load the configuration file, then associate the configuration with your STid or OSDP readers.

Before you begin

Configure STid or OSDP readers. For more information, see the Synergis™ Softwire Integration Guide.

Procedure

  1. Log on to the Synergis™ unit.
  2. Click Configuration > MIFARE DESFire.
  3. Click Select smart cards sites file, and browse to either your custom configuration file (SmartCardsSites.xml) or the default file that came with your Security Center installation.
  4. Click Upload.
    The following message is displayed: Upload successful.
  5. Associate the readers and MIFARE DESFire configurations:
    1. For each reader, select a site from the Available configurations list.
    2. Click Add.
  6. Click Save.
    You are prompted to perform a software restart.
  7. Click Restart now.