Testing interface modules connected to the Synergis™ unit - Synergis™ Softwire 11.3.4

Synergis™ Appliance Configuration Guide 11.3.4
Product
Synergis™ Softwire
Content type
Guides > Administrator guides
Version
11.3
Release
11.3.4
Language
English
Last updated
2022-09-15

You can test your hardware connections and configuration by monitoring their responses on the I/O diagnostics page in real time of the Synergis™ Appliance Portal.

Before you begin

Configure the interface modules.

What you should know

You can customize the page to show the elements that you want to monitor.

Procedure

  1. Log on to the Synergis™ unit.
  2. Click I/O diagnostics > Interfaces.
    Interfaces page of the Synergis™ Appliance Portal showing the options under an expanded interface module.
  3. Click Down arrow to expand the interface you want to monitor.
  4. Activate the devices (card readers, door sensors, door locks, and so on) connected to the Synergis™ unit through the interface modules.
    If they do not behave as expected, check your connections and your interface module configurations.