To configure Assa Abloy IP locks to work with a Synergis™ unit, you must first configure the locks with the Lock Configuration Tool (LCT), and then pair the locks to the Synergis™ unit using the Synergis™ Appliance Portal.
The following table summarizes the IP lock configuration process.
| Phase | Description | See |
|---|---|---|
| 1 | Make sure that your IP lock firmware is up to date and supported by your version of Synergis™ Softwire. |
|
| 2 | Configure the IP lock using the LCT.
|
|
| 3 | Establish communication between the Synergis™ unit and its connected IP locks in the Synergis™ Appliance Portal. |