Setting MR51e to use Public DHCP addressing mode - Synergis Softwire 11.4.0

Synergis™ Appliance Configuration Guide 11.4.0
Applies to
Synergis Softwire 11.4.0
Last updated
2023-03-28
Content type
Guides > Administrator guides
Language
English
Product
Synergis Softwire
Version
11.4

If your network supports DHCP, it is recommended to set your MR51e panels to use Public DCHP addressing model.

Procedure

  1. On the MR51e panel, set S1 (Configuration DIP switches) to 0001.
    Set DIP Switch 4, 3, and 2 to OFF, and DIP Switch 1 to ON.
  2. Press S2 (Reset Switch).
Parent topic: Adding MR51e panels to a Mercury controller