Adding Synergis Cloud Link units to a hosted SaaS Access Manager - Synergis Softwire 11.4.1

Synergis™ Appliance Configuration Guide 11.4.1

Applies to
Synergis Softwire 11.4.1
Last updated
2023-04-03
Content type
Guides > Administrator guides
Language
English
Product
Synergis Softwire
Version
11.4

Adding a Cloud Agent-enabled Synergis™ Cloud Link unit to your Access Manager activates that unit to make secure connections to a Security Center SaaS edition hosted deployment.

Before you begin

Procedure

To add a Synergis Cloud Link to a hosted SaaS Access Manager:

  1. From the Config Tool home page, open the Access control task, and click the Roles and units view.
  2. Click Access control unit ().
  3. In the Creating a unit dialog box, click Unit type and select Synergis™ SaaS.
  4. In the Network endpoint area, enter the hostname or IP address of the unit, then click Validate.
    The system verifies the Synergis Cloud Link and displays the MAC address of the unit.
  5. Enter the admin username and password.
    The default username is admin. You must change the default password to enroll the unit.
  6. Review the Creation summary window, and click Create.
    Config Tool sends the information of the Synergis Cloud Link to the Access Manager, which forwards it to the SaaS gateway. When the unit is connected to the SaaS gateway, a confirmation message is displayed.
  7. Click Close, and then click Refresh ().
    The newly added access control unit appears under the Access Manager that it was assigned to in the Roles and units view. The default entity name is the hostname of the Synergis Cloud Link unit. This unit now only responds to the commands issued by this Access Manager.

To delete a Synergis Cloud Link from a hosted SaaS Access Manager:

  1. In the Roles and units view, select the Synergis Cloud Link unit from the entity tree.
  2. Click Delete ().
  3. In the confirmation dialog box that opens, click Delete.

After you finish

Associate the peripherals (readers, inputs, outputs, and so on) controlled by this unit to doors and zones defined in your system. For more information about deploying Synergis, see Deploying your access control system.