To disable encryption on a SALLIS router, you need to disable it in both the Synergis™ Appliance Portal and on the router itself.
Procedure
-
Log on to the
Synergis
unit.
-
Click .
-
At the top of the Hardware column, click
Add ().
-
Select the SALTO channel, and then clear the Enable
encryption option.
-
Click Save.
In the device tree, all SALLIS locks under the selected channel appear in red
(inactive).
-
For an RS-485 router, do the following:
-
Using the SALLIS application, download the router configuration to the
PPD.
-
On the PPD, select Update router.
-
Connect the PPD to the router.
-
For a PoE router, do the following:
NOTE: If you have many routers to update, update them one at a time.
-
Open the PoE router cover, and press and hold the CLR
button for 5 seconds.
The LED on the PoE router board turns orange.
-
Using a web browser, connect to the web portal of the router.
Enter
http://192.168.0.234
in the browser URL
field.
NOTE: Your workstation must be on the same subnet as the router for
you to connect to its web portal.
-
On the browser page, under , select Yes.
-
Click Send.
Results
The message
Configuration successfully sent is displayed in the browser. In the
device tree, all SALLIS locks under the selected channel are displayed in black
(active).