To enable the privacy mode from Config Tool on doors controlled by Assa Abloy IP
locks, you must create a Boolean custom field named Privacy Mode
for doors,
and set it to TRUE on the doors on which you want to have this feature enabled.
Before you begin
What you should know
The
following information describes how this feature works. To activate the privacy mode,
press the privacy button found on the inner side of the door while the door is
closed. The LED on the button flashes slowly for approximately 2 minutes to indicate
that privacy mode is in effect. This action is equivalent to throwing the deadbolt on
locks equipped with a monitored deadbolt.
NOTE: If the reader beeps and flashes purple
five times when you press the privacy button, privacy mode cannot be activated
because the door is open.
All cardholders with a security clearance value lower than seven function as supervisors. The privacy mode is deactivated when the door is opened from the inside, or when a supervisor badges in.
Procedure
Results
- Deadbolt locked
- This event is triggered when privacy mode is activated on a door.
- Deadbolt unlocked
- This event is triggered when privacy mode is deactivated on a door.