Enrolling Synergis units in Security Center - Synergis Softwire 11.4.3

Synergis™ Appliance Configuration Guide 11.4.3

Product
Synergis™ Softwire
Content type
Guides > Administrator guides
Version
11.4
Release
11.4.3
Language
English
Last updated
2024-04-16

To enroll a Synergis™ unit in Security Center, assign the unit to an Access Manager role.

What you should know

When you create an Access Manager role, the Synergis extension is added automatically. This extension is created with the default discovery port 2000. If you configured a different port in the unit's network properties, you must also change it in Config Tool to match.
If you select the Activate peer-to-peer option in Config Tool, be aware that only up to 15 units can be connected as peers.
Best Practice: If you have multiple Access Manager roles controlling Synergis units on the same subnet, ensure that they use different discovery ports. Otherwise, you might experience performance issues.

Procedure

  1. If the unit does not use the default discovery port, change the Synergis extension discovery port to match the port configured on your unit:
    1. From the Config Tool homepage, open the Access control task, and click the Roles and units view.
    2. Select the Access Manager, and click the Extensions tab.
    3. Select the Synergis extension.
    4. Select the discovery port and click Edit the item ().
    5. In the Discovery port dialog box, enter the port number configured for your units and click Save.
  2. Add the Synergis unit to the Access Manager role.