Preparing to enroll SimonsVoss SmartIntego locks - Synergis Softwire 11.4.3

Synergis™ Appliance Configuration Guide 11.4.3

Product
Synergis™ Softwire
Content type
Guides > Administrator guides
Version
11.4
Release
11.4.3
Language
English
Last updated
2024-04-16

Before you can enroll the SmartIntego locks on the Synergis™ unit, you must pair the Gateway node to your SmartIntego locks.

What you should know

The steps and instructions tagged with Hardening are optional, but will protect your system against cyberattacks.

Procedure

  1. Follow the documentation that came with your SmartIntego devices and pair the Gateway node to your SmartIntego locks.
  2. Write down the following information:
    • The IP address of the Gateway node.
    • The device IDs taken from the SmartIntego Manager window.

      The Gateway node ID is the second hexadecimal number following GN_ER.

      The lock ID is the first hexadecimal number following LN.

  3. (Hardening) Follow the documentation that came with your SmartIntego devices and configure the communication encryption key for your locks.
    SmartIntego software does not allow a lock to be paired to the hub without a password. Use a strong password for the locking system.