Setting MR51e to use Public DHCP addressing mode - Synergis Softwire 11.4.3

Synergis™ Appliance Configuration Guide 11.4.3
Product
Synergis™ Softwire
Content type
Guides > Administrator guides
Version
11.4
Release
11.4.3
Language
English
Last updated
2024-04-16

If your network supports DHCP, it is recommended to set your MR51e panels to use Public DCHP addressing model.

Procedure

  1. On the MR51e panel, set S1 (Configuration DIP switches) to 0001.
    Set DIP Switch 4, 3, and 2 to OFF, and DIP Switch 1 to ON.
  2. Press S2 (Reset Switch).
Parent topic: Adding MR51e panels to a Mercury controller