With Allegion Schlage's ENGAGE platform, you can store credentials on key cards and on
compatible mobile phones. To do this, you must integrate Allegion Schlage LE and NDE locks
through the ENGAGE platform by enrolling a Mercury EP, LP, or MP controller in Config Tool and
adding the ENGAGE Gateway as an interface.
Before you begin
Initial setup and lock pairing to the ENGAGE Gateway is done through the Allegion ENGAGE
mobile app, which is available for Android and iOS devices. This is done by tapping
Connect, then tapping the plus sign in the corner and following the
steps. When this is done, enroll the locks in Config Tool.
What you should know
The process for enrolling Allegion Schlage NDE and LE locks with the ENGAGE integration
in Config Tool is the same as enrolling the PIM400 module, except that you select
ENGAGE Gateway when you set the interface.
Procedure
-
Enroll the Allegion Schlage NDE or LE locks as described in Enrolling Allegion Schlage AD locks and PIM modules on the Synergis unit.
-
At step 5, select the ENGAGE Gateway from the Model drop-down
menu after clicking Add an item (
) in the Interfaces list.
Results
The ENGAGE Gateway with all its connected downstream panels and peripheral devices is
listed on the
Peripherals page.
