Transferring files to OSDP devices in the Synergis Appliance Portal - You can upgrade the firmware or configuration of OSDP devices by transferring files to the devices in the Synergis™ Appliance Portal. - Synergis Softwire 11.6.0

Synergis™ Appliance Configuration Guide 11.6.0
Product
Synergis Softwire
Content type
Guides > Administrator guides
Version
11.6
Release
11.6.0
ft:locale
en-US
Last updated
2024-11-05

You can upgrade the firmware or configuration of OSDP devices by transferring files to the devices in the Synergis™ Appliance Portal.

What you should know

  • The following procedure only applies to OSDP devices, such as secure I/O modules and readers, that connect directly to the Synergis™ Cloud Link unit.
  • Use the firmware and configuration files provided by your manufacturer.

Procedure

  1. Log on to the Synergis unit.
  2. Click Configuration > Advanced OSDP.
  3. In the File transfer section, select the checkbox in the Transfer column of the devices to which you want to transfer the file.
  4. Click Select file.
  5. In the file browser, select the firmware or configuration file, and click Open.
  6. Click Transfer file.
    File Transfer section of the Advanced OSDP page in the Synergis Appliance Portal.

Results

The firmware or configuration is applied after the selected devices restart.