Preparing to enroll SimonsVoss SmartIntego locks - Synergis™ Cloud Link 2.0.4

Synergis™ Cloud Link Administrator Guide 2.0.4

Applies to
Synergis™ Cloud Link 2.0.4
Last updated
2022-09-15
Content type
Guides > Administrator guides
Language
English (United States)
Product
Synergis™ Cloud Link
Version
2.0

Before you can enroll the SmartIntego locks on the Synergis™ unit, you must pair the Gateway node to your SmartIntego locks.

What you should know

The steps and instructions tagged with Hardening are optional, but will protect your system against cyberattacks.

Procedure

  1. Follow the documentation that came with your SmartIntego devices and pair the Gateway node to your SmartIntego locks.
  2. Write down the following information:
    • The IP address of the Gateway node.
    • The device IDs taken from the SmartIntego Manager window.

      The Gateway node ID is the second hexadecimal number following GN_ER.

      The lock ID is the first hexadecimal number following LN.

  3. (Hardening) Follow the documentation that came with your SmartIntego devices and configure the communication encryption key for your locks.
    SmartIntego software does not allow a lock to be paired to the hub without a password. Use a strong password for the locking system.