Configuring the network properties of the Synergis™ Cloud Link unit - Synergis™ Cloud Link 2.0

To make sure the Synergis™ Cloud Link unit can be reached on your Security Center system’s network, you must configure the unit's network properties.

1. Log on to the Synergis™ Cloud Link unit.
2. Click Configuration > Network.
3. In the Access Manager settings section, change the Discovery port if necessary.
4. In the Network settings section, select the LAN1 or LAN2 as the network interface used to connect the Synergis™ Cloud Link unit to its Access Manager role, and then configure the unit’s IP address and network properties.
   IMPORTANT: If the unit is not on the same network segment as the Access Manager role, then the unit's IP address must be set to Static IP or DHCP with Static IP allocation.
   
5. Click Save.