Configuring downstream controller settings on the Synergis Cloud Link unit - Synergis Cloud Link 2.1.1

Synergis™ Cloud Link Administrator Guide 2.1.1

Applies to
Synergis Cloud Link 2.1.1
Last updated
2023-04-12
Content type
Guides > Administrator guides
Language
English
Product
Synergis Cloud Link
Version
2.1

You can configure interface-module-specific behavior for all the interface modules connected to the same Synergis™ Cloud Link unit on the Downstream controller settings page of the Synergis™ Appliance Portal.

Procedure

  1. Log on to the Synergis Cloud Link unit.
  2. Click Configuration > Downstream controller settings.
    Downstream controller settings page in the Synergis™ Appliance Portal.
  3. In the Assa Abloy IP lock settings section, configure the following option:
    Enable passage mode per access rule
    Creates the PassageMode custom field required for enabling the passage mode feature for Assa Abloy IP locks per access rule.

    For more information, see Enabling passage mode on Assa Abloy IP locks.

  4. In the Axis settings section, configure the following option:
    A1001: Default to unsecure connection
    Select this option so that you can use Synergis™ Softwire to upgrade the firmware on your AXIS A1001 controller if it does not support HTTPS.
  5. Click Save.

Results

All changes take effect after a software restart.