Enrolling ENGAGE-integrated Allegion Schlage LE and NDE locks through Mercury controllers - Synergis Cloud Link 2.1.1

Synergis™ Cloud Link Administrator Guide 2.1.1

Applies to
Synergis Cloud Link 2.1.1
Last updated
2023-04-12
Content type
Guides > Administrator guides
Language
English
Product
Synergis Cloud Link
Version
2.1

Schlage's ENGAGE platform allows credentials to be stored not only on key cards, but also on compatible mobile phones. Integration is done through Mercury EP1501, LP1501, EP1502, LP1502, EP2500, LP2500, EP4502, or LP4502 panels.

Before you begin

Initial setup and lock pairing to the ENGAGE Gateway is done through the Allegion ENGAGE mobile app, which is available for Android and iOS devices. This is done by tapping Connect, then tapping the plus sign in the corner and following the steps. When this is done, enroll the locks in Config Tool.

What you should know

The process for enrolling Allegion Schlage NDE and LE locks with ENGAGE integration in Config Tool is the same as enrolling the PIM400, except that you select ENGAGE Gateway when you set the interface.

Procedure

  1. Enroll the Allegion Schlage NDE or LE locks as described in Enrolling Allegion Schlage AD locks and PIM modules on the Synergis unit.
  2. At step 5, select the ENGAGE Gateway from the Model drop-down menu after clicking Add an item () in the Interfaces group.
    The ENGAGE Gateway with all its connected downstream panels and peripheral devices is listed in the Peripherals tab.