Mounting the Synergis™ Cloud Link appliance - Synergis™ Cloud Link

Synergis™ Cloud Link Hardware Installation Guide

Applies to
Synergis™ Cloud Link
Last updated
2022-09-15
Content type
Guides > Installation guides
Language
English
Product
Synergis™ Cloud Link
Version
2.0

You can use the mounting holes on the Synergis™ Cloud Link to mount the appliance to a suitable flat surface. Alternatively, you can mount the appliance to a DIN rail using the optional DIN rail mounting bracket.

Procedure

To install the Synergis™ Cloud Link on a flat surface:

  1. Install the appliance using the provided self-drilling screws (#6 x 3/8") or machine screws (#6-32 x 3/8").
    NOTE: If your installation requires any other type or length of fasteners, use #6 (M3.5) screws.
    Synergis™ Cloud Link mounting dimensions.
    In this example, the provided self-drilling screws are installed using a 6 mm (0.25 in.) socket.
    Attaching the Synergis™ Cloud Link using self-drilling screws.
    IMPORTANT: If you are mounting the appliance to a surface that is not grounded, you must connect a ground wire to one of the mounting screws. For more information, see Synergis™ Cloud Link connections.

To install the Synergis™ Cloud Link on a DIN rail:

  1. Attach the optional DIN rail bracket to the Synergis™ Cloud Link using the screws and lock washers included with the kit.
    Attaching the DIN rail bracket to the Synergis™ Cloud Link
  2. Hook the bottom of the bracket to the DIN rail and rotate to engage the clip.
    Tip: Hook the spring behind the DIN rail.