What is Synergis™ Cloud Link? - Synergis™ Cloud Link

Synergis™ Cloud Link Hardware Installation Guide

Applies to
Synergis™ Cloud Link
Last updated
2022-09-15
Content type
Guides > Installation guides
Language
English
Product
Synergis™ Cloud Link
Version
2.0

Synergis™ Cloud Link is an intelligent PoE-enabled IoT gateway designed to address the demand for a non-proprietary access control solution.

Synergis™ Cloud Link provides native support for popular non-proprietary security modules, from intelligent controllers such as Mercury Security, HID Global, and Axis communications, to electronic locks from ASSA ABLOY, Allegion, and SimonVoss.

This guide describes how to configure the next-generation Synergis™ Cloud Link appliance for use with Security Center. It assumes you are familiar with the Security Center platform, specifically with the Synergis™ access control system.

For more information on the available Synergis™ Cloud Link hardware versions, see Differences between Synergis™ Cloud Link appliances.

Synergis™ Cloud Link appliance.
  Hardware feature What you should know
A RS-485 ports Synergis™ Cloud Link includes four RS-485 communication channels. The number of modules you can connect to each RS-485 port depends on the type of interface modules you are installing. For more information, see Synergis™ Cloud Link RS-485 communication channels.
B Micro SD card Future use
C Ethernet ports Two Ethernet ports are provided for connection to the IP network.
NOTE: Ethernet port 1 can be used to power the appliance using Power over Ethernet (PoE). For more information, see Powering the Synergis™ Cloud Link appliance.
D Mounting holes You can either mount the appliance to a suitable surface using the mounting holes or to a DIN rail using the optional DIN rail mounting bracket. For more information, see Mounting the Synergis™ Cloud Link appliance.
E Power Connect the appliance to a 12 V dc (nominal) power supply. For more information, see Synergis™ Cloud Link power supply requirements.
F Information () LED The LED provides feedback on system status. For more information, see Synergis™ Cloud Link LED feedback.
G Command code DIP switches The four CODE DIP switches allow you to run commands which can, for example, reset certain appliance configurations. For more information, see Synergis™ Cloud Link DIP switch command codes.
H Monitoring inputs The appliance includes four inputs that you can use to monitor external events in the access control system. For more information, see Synergis™ Cloud Link monitoring inputs.