Not all Synergis™ appliance features are supported with the integration of Synergis™ IX controllers.
|Synergis™ Appliance Portal and firmware features||Supported|
|Hardware configuration (pre-staging capability)|
|Manual enrollment (Add hardware dialog box)||Yes|
|Automatic enrollment (Scan button)||No|
|Configuration cloning (Clone button)||No|
|I/O diagnostics (live monitoring of inputs, relays, and readers)||Yes|
|Interface module firmware display||No|
|Interface module firmware upgrade (apply recommended firmware)||Yes|
|Access control behavior (Synergis™ unit-wide settings)|
|Lock relay (After door opens or When door closes)||No1|
|Interlock setting (Single door unlock or Single door open)||Yes2|
|Do not generate Door open too long events when door is unrestricted||Yes|
|Reader setting (Card or PIN or Card only)||Yes|
|Maximum PIN length in digits||4 - 8|
|Degraded mode settings||Not applicable|
1 The Lock relay settings are overwritten by the individual door settings configured in Security Center.
2 The override and lockdown inputs are not supported.