Configuring the default parameters for Synergis IX intrusion panels - Australia and New Zealand only

You can change the default parameters that apply to all Synergis™ IX panels connected to a particular Intrusion Manager role.

1. From the Config Tool homepage, open the Intrusion detection task.
2. Select the Intrusion Manager role and click Extensions > Synergis™ IX.
   
3. Configure how Security Center processes offline events from the Synergis IX intrusion panel. The panel is the source of the event.
   An offline event is an event that occurs while the event source is offline. Security Center only receives the offline events when the event source is back online. What Security Center does depends on when the event was received. For more information, see About events.

   Grace period

   Period when offline events from the panel are treated as live events; they are logged and sent to online users.

   Alarm grace period

   Period when offline alarm events from the panel are treated as live events; they are logged and sent to online users.

   An alarm event is defined as one of the following:

   • Input alarm activated
   • Intrusion detection area alarm activated
   • Intrusion detection area duress
   • Intrusion detection unit tamper

   Persistence grace period

   Period during which offline events from the panel are logged but not sent to online users. Offline events outside this period are discarded.

   NOTE: Grace periods are calculated from the time when the panel is back online.

   For more information on how Security Center processes events and alarms, see About events and About alarms.

4. Click Apply.