Supported Synergis™ appliance features for EntraGuard integration with Synergis™ Softwire 11.2.1 - Synergis™ Softwire 11.2.1

Synergis™ Softwire 11.2.1 Integration Guide for Keri EntraGuard Systems

Applies to
Synergis™ Softwire 11.2.1
Last updated
2021-11-24
Content type
Guides > Integration guides
Language
English
Product
Synergis™ Softwire
Version
11.2

Not all Synergis™ appliance features are supported with the integration of Keri EntraGuard systems.

The Keri EntraGuard integration supports the following Synergis™ Appliance Portal and Synergis™ Softwire features. For a description of these features, see Interface tour of the Synergis™ Appliance Portal.
Synergis™ Appliance Portal and firmware features Supported
Hardware configuration (pre-staging capability)1  
Manual enrollment (Add hardware dialog box) Yes
Automatic enrollment (Scan button) No
Property configuration No
Configuration cloning (Clone button) No
I/O diagnostics (live monitoring of inputs, relays, and readers) No
Interface module firmware display No
Interface module firmware upgrade (apply recommended firmware) Automatic
Access control behavior (Synergis™ unit-wide settings)2  
Lock relay (After door opens or When door closes) No
Interlock setting (Single door unlock or Single door open) No
Do not generate Door open too long events when door is unrestricted N/A
Reader setting (Card or PIN or Card only) No
Maximum PIN length in digits N/A

1 The enrollment of the NXT module must be enabled with an XML configuration file.

2 The door behavior settings are overwritten by the individual door settings configured in Security Center.