Not all Synergis™ appliance features are supported with the integration of Keri EntraGuard systems.
|Synergis™ Appliance Portal and firmware features||Supported|
|Hardware configuration (pre-staging capability)1|
|Manual enrollment (Add hardware dialog box)||Yes|
|Automatic enrollment (Scan button)||No|
|Configuration cloning (Clone button)||No|
|I/O diagnostics (live monitoring of inputs, relays, and readers)||No|
|Interface module firmware display||No|
|Interface module firmware upgrade (apply recommended firmware)||Automatic|
|Access control behavior (Synergis™ unit-wide settings)2|
|Lock relay (After door opens or When door closes)||No|
|Interlock setting (Single door unlock or Single door open)||No|
|Do not generate Door open too long events when door is unrestricted||N/A|
|Reader setting (Card or PIN or Card only)||No|
|Maximum PIN length in digits||N/A|
1 The enrollment of the NXT module must be enabled with an XML configuration file.
2 The door behavior settings are overwritten by the individual door settings configured in Security Center.