Configuration overview for Assa Abloy IP locks with Synergis™ Softwire 11.0 - Synergis™ Softwire 11.0

Synergis™ Softwire Integration Guide 11.0

series
Synergis™ Softwire 11.0
revised_modified
2020-11-27
category_custom
Guides
Guides > Integration guides
prodname_custom
Synergis > Synergis™ Softwire
vrm_version
11.0

To configure Assa Abloy IP locks to work with a Synergis™ unit, you must first configure the locks with the Lock Configuration Tool (LCT), and then pair the locks to the Synergis™ unit using the Synergis™ Appliance Portal.

The following table summarizes the IP lock configuration process.
Phase Description See
1 Make sure your IP lock firmware is up to date and supported by Synergis™ Softwire 11.0.
2 Configure the IP lock using the LCT.
  • Configure the Host address of the IP lock to be the same as the IP address of the Synergis™ unit.
  • Configure the communication port of the IP lock that the Synergis™ unit will use as a listening port when discovering the locks (Default=2571).
  • If encryption is required, set the AES key in the lock profile. You need this key after you pair the IP lock with the Synergis™ unit.
  • Network & Lock Configuration Tool User Manual that came with your lock.
3 Establish communication between the Synergis™ unit and its connected IP locks in Synergis™ Appliance Portal.

Watch this video to learn more. Click the Captions icon (CC) to turn on video captions in one of the available languages.