To enable the privacy mode from Config
Tool on doors controlled by Assa Abloy IP
locks, you must create a Boolean custom field named
Privacy Mode for doors,
and set it to TRUE on the doors on which you want to have this feature enabled.
Before you begin
The Assa Abloy IP locks that support the privacy mode are the Cx-type PoE and WiFi locks.
What you should know
All cardholders with a value lower than 7 function as supervisors. The privacy mode is deactivated when the door is opened from the inside, or when a supervisor badges in.
Create a Boolean type
custom field for door entities, and name it
Privacy Mode.You must spell the name exactly as it is written, with capital and lowercase letters, and include the space.
Open the Area view task and set the Privacy
Mode custom field to TRUE for all doors where this feature must be
Tip: If you need this feature enabled on many doors, we recommend using the Copy configuration tool.
- Deadbolt locked
- This event is triggered when privacy mode is activated on a door.
- Deadbolt unlocked
- This event is triggered when privacy mode is deactivated on a door.